DIY Aluminum Combo Pickets Pedestrian Gate - No Lock
What's Included
⚒️ Product Specifications
Warranty and Returns
💡 Highlights
More About This Product
DIY Aluminium Pedestrian Gate Kit – No Lock Version designed for projects where flexibility in lock selection and positioning is required. This combo picket gate is supplied without pre-drilled lock holes, allowing you to determine the most suitable hardware and placement based on your specific installation.
This makes it a practical choice for custom installations, non-standard openings, and especially double gate setups where alignment and lock positioning need to be adjusted onsite.
Is This the Right Gate for Your Project?
- Choose this gate if you need full control over lock positioning
- Choose this gate if you are building a double gate setup
- Choose a pre-drilled version if you prefer a fixed lock position
- Choose DD Technologies latch locks for the easiest compatible installation
Key Features
- DIY aluminium pedestrian gate kit for flexible installation
- No pre-drilled lock holes – allows custom lock positioning
- Suitable for double gate configurations
- Adjustable frame – can be trimmed onsite to suit your opening
- Adjustable picket spacing before final assembly
- Modern vertical combo picket design
- Powder-coated aluminium for outdoor durability
Designed for Flexible Installations
This gate is designed for projects where site conditions vary. The frame can be adjusted onsite, and picket spacing can be finalised during assembly, making it suitable for installations where openings are not perfectly standard.
The absence of pre-drilled lock holes allows installers to determine the most appropriate latch and lock position after the gate has been installed, which is particularly useful in double gate setups.
Lock & Hardware Compatibility
All FENLUX pedestrian gates use a 65x65mm aluminium frame. When selecting your own lock or latch system, it is important to ensure compatibility with this frame size.
FENLUX recommends DD Technologies latch locks for straightforward installation. Other third-party locks, including digital or keypad systems, may also be compatible depending on their specifications. Compatibility should be confirmed before purchase, and some installations may require professional adjustment.
Where This Gate Works Best
- Double gate installations
- Custom lock setup projects
- Residential side access gates
- Front garden entry gates
- Modern aluminium fencing systems
- Landscaping and renovation projects
What’s Included
- 65x65mm aluminium gate frame components
- 40x40mm rails
- 65x16mm vertical aluminium pickets with caps
- Assembly screws
- Driver bit for assembly
Product Specifications
- Material: Powder-coated aluminium alloy
- Gate type: DIY vertical picket pedestrian gate
- Frame size: 65x65mm
- Slat size: 65x16mm
- Default picket gap: 23.5mm
Frequently Asked Questions
Can this gate be used as a double gate?
Yes. This version is well suited for double gate setups as lock positioning can be determined after installation.
Does this gate come with a lock?
No. This gate is supplied without a lock or latch.
What type of lock can I use?
Any lock or latch compatible with a 65x65mm gate frame may be suitable. DD Technologies latch locks are recommended for easier installation.
Can the gate be adjusted onsite?
Yes. The frame can be trimmed onsite and picket spacing can be adjusted before assembly.
Is this suitable for my site?
Yes. Fenlux systems are designed for real residential sites.
Uneven ground, non-exact spacing and on-site adjustment are expected.
Do my measurements need to be exact?
No. Exact measurements are not required before ordering.
Final fitting and adjustments are normally done on site during installation.
What if my post spacing doesn’t match the panel width?
That’s normal. Panels and rails can be trimmed to suit actual spacing.
Components can be shortened, but not extended.
What if something doesn’t fit as expected?
Pause before making irreversible changes.
Most issues are related to spacing or alignment and can be resolved by adjustment.
What if I realise I ordered the wrong size?
In many cases, on-site adjustment solves the issue.
One advantage of modular DIY systems is that individual components can be replaced without restarting the entire project.
What if I’m unsure during installation?
Fenlux systems are designed to allow rework.
Minor mistakes do not usually mean the project has failed.
Looking for more detailed scenarios?Visit our Help & FAQ page.
10-Year Warranty
Powder-Coated Aluminium
30-Day Returns Guarantee
Assembly Guide Video Available
Not sure how to DIY
Watch our short video on Youtube
Feel free to contact us if you need more information.