DIY Vertical Pickets Sliding Gate

FENLUX aluminium picket sliding gates are designed for modern front fence and driveway gate projects across Australia. Matching aluminium picket fence panels, pedestrian gates and fence posts are available to help create a complete aluminium fencing system.are available to help create a complete aluminium fencing system.

DIY Aluminium Vertical Picket Sliding Gate designed for residential driveway projects where a modern appearance, practical sliding function, and on-site flexibility are required. Supplied as a complete gate panel kit with essential sliding hardware, this system allows customers to assemble a full sliding gate panel with confidence.

The vertical picket design provides a clean and balanced street-facing look, making it a strong match for modern aluminium fencing systems. Aluminium construction offers a durable and low-maintenance solution for long-term outdoor use.

Is This the Right Sliding Gate for Your Project?

• Choose this gate if your driveway opening is level from left to right
• Choose this gate if you want a modern aluminium sliding gate for your driveway
• Choose this gate if you are comfortable assembling a DIY gate kit
• Choose this gate if you plan to organise your own installation or installer

Standard Gate vs Sloping Driveway

This is a standard rectangular sliding gate, designed for driveway openings that are level from left to right.

If your driveway slopes from front to back, this does not normally affect the gate.

However, if your driveway slopes from left to right (across the gate opening), a standard rectangular gate may appear visually out of level once installed.

For sloping driveway conditions, a raked bottom sliding gate is typically required. These are custom-made by FENLUX to suit site conditions and are supplied as finished panels rather than DIY kits.

Assembly vs Installation – What to Expect

This product is designed as a DIY assembly gate kit. The gate panel can be assembled by most customers, and FENLUX provides assembly guidance, including video support, to assist throughout the process.

Important: assembly and installation are different stages. While assembly is generally achievable, installation of a sliding gate system may require site preparation, alignment, and installation experience depending on your project.

Key Features

• DIY aluminium sliding gate kit for driveway applications
• Modern vertical picket gate design
• Powder-coated aluminium for outdoor durability
• Can be shortened onsite to suit actual opening width
• Adjustable slat layout during assembly
• Supplied with essential sliding gate hardware components
• Suitable for manual use or future motor planning

Onsite Adjustment & Cutting Guidance

This is a standard-size gate kit, with width and slat quantity pre-calculated based on the selected size. The gate can be shortened onsite, but it cannot be extended.

When reducing the gate width, it is recommended to cut within slat gap sections where possible. Cutting through pre-drilled fixing areas may expose rivet holes on the gate beam.

FENLUX can assist by advising suitable cutting positions based on your required size. This forms part of our assembly guidance support.

What’s Included

• Sliding gate panel kit
• Vertical aluminium pickets
• Assembly screws and driver bit
• Z guide / guide components
• Nylon block
• C type guide components
• Aluminium ground track
• Ground stopper and gate catcher

Optional items (sold separately): 100x100mm gate posts, gate motors, motor racks, and other installation hardware can be added based on your project requirements.

Not included: site-specific fixing bolts, concrete, mounting hardware, installation tools, and consumables required for your installation.

Motor & Installation Considerations

This gate can be used as a manual sliding gate or prepared for motorisation. Gate motors are not included but are available separately from FENLUX.

Installation requirements vary depending on ground conditions, post setup, track alignment, and motor configuration. Customers should confirm installation requirements before purchase or arrange a qualified installer if needed.

Where This Gate Works Best

• Residential driveway entrances
• Modern front boundary fencing
• Properties requiring sliding gate solutions
• Projects planning for manual or automated gate systems
• Aluminium fence and gate matching projects

Complete Aluminium Picket Fencing System

This aluminium sliding gate is commonly used together with matching aluminium picket fence panels and pedestrian gates for complete front fencing and driveway entrance projects.

• Matching aluminium picket fence panels available
• Matching pedestrian gates available
• Compatible aluminium fence posts available
• Suitable for complete driveway and front fence layouts
• Suitable for modern residential fencing systems

Product Specifications

• Material: Aluminium Alloy 6060
• Gate type: Sliding driveway gate
• Style: Vertical picket design
• Slat size: 65x16mm
• Rail size: 115x50mm
• Frame size: 65x65mm
• Default gap: 10mm

Frequently Asked Questions

Can I assemble this gate myself?
Yes. The gate panel is designed for DIY assembly, and FENLUX provides guidance and video support.

Can I install the gate myself?
That depends on your experience. Installation may require site preparation and alignment, so some customers choose to use an installer.

Does this gate include a motor or post?
No. These items are available separately and can be added to suit your project.

Can the gate be shortened onsite?
Yes. The gate can be shortened, but not extended. Cutting position should be planned to avoid exposing fixing points.

Can this sliding gate be matched with the same fencing style?
Yes. Matching aluminium picket fence panels, pedestrian gates and fence posts are available to help create a complete and consistent fencing system.